Applying Re·design with Prima® Décor Transfers is truly child's play! Whether you want to transform a complete cabinet or add a unique botanical or vintage print to a small home accessory: with the right preparation, you are guaranteed a sleek and professional result.
Below, we explain step by step how to easily apply a transfer.
Step 1: Prepare the surface
Good adhesion begins with a clean and smooth base.
- Lightly sand the surface if necessary with fine-grit sandpaper for optimal adhesion.
- Make the surface thoroughly dust and grease-free.
- Are you painting the piece of furniture first with chalk paint? Then ensure that the paint layer is completely dry before you apply the transfer.
Step 2: Determine the position & compose your design
Take the time to determine exactly where you want to place the image:
- Cut the desired patterns or loose elements from the transfer if necessary. Always keep the white backing paper on at this stage!
- Note: As soon as the adhesive side of the transfer touches the surface, it sticks immediately. It is virtually impossible to reposition the transfer afterwards.
- Handy tip: Attach the cut-out pieces (including the backing paper) to your piece of furniture with a small piece of painter's tape. This allows you to shift, puzzle, and view the final result at your leisure!
- Creating depth: You can apply multiple transfer pieces on top of each other. Where the images overlap, the top layer covers the bottom one. This creates a beautiful 3D effect and adds extra depth to your design.
Step 3: Apply the transfer
Are you completely satisfied with the layout? Then it is time for the real work:
- Remove the pieces attached with the painter's tape.
- Carefully remove the white backing paper from the adhesive side.
- Place the transfer on the desired spot with the adhesive side facing down.
- Press the transparent film smooth onto the surface, working from the center outwards to avoid air bubbles.
Step 4: Rub the image on (Transferring)
Now rub the image permanently onto the piece of furniture using the included wooden spatula:
- Hold the wooden stick at an angle of approximately 45 degrees against the back of the transparent film.
- Apply even pressure and rub over the entire image. Due to the friction and pressure, the print releases from the film and adheres to the furniture (just like a temporary press-on tattoo!).
- Method: Work slowly from left to right (or from top to bottom). Carefully lift the transparent film slightly to check if the print has been transferred properly.
- Is a piece still sticking to the film? Simply lay the film back down and rub firmly with the stick over that specific spot again.
Step 5: Finishing & Protecting
Once the entire image has been transferred and the film has been removed, rub the transfer one more time very gently with a dry, soft cloth (or the rounded side of the film). This will permanently press down any raised edges.
And your unique piece of furniture is ready!
Finishing tip: To protect your transfer against wear, moisture, and scratches, we recommend finishing the image after application with a high-quality water-based topcoat/varnish or a transparent furniture wax.